Sponsored

How tabless/multi-tab cells are helping e-bike batteries keep up

How tabless/multi-tab cells are helping e-bike batteries keep up

E-bike motors are becoming more powerful, and the batteries powering them need to keep up. Higher peak power means the battery needs to deliver more current, making it important to manage both current flow and heat. For Joycube, this is where tabless/multi-tab cell technology comes into play, helping meet these demands by improving how current flows through the cell.

“More and more e-bike systems are offering higher torque, adding boost modes, and increasing assistance ratios, which require batteries to deliver higher peak power,” says Olivia Huang from the R&D department at Joycube.

From 8A to 40A

Just how much are things changing? In the past, typical e-bike battery packs handled continuous discharge currents of around 7A to 8A. The system manufacturer's overcurrent protection threshold is around 15A. Today, Joycube’s packs can deliver up to 25A, while the company expects future requirements to reach 30A or even 40A.

As e-bike drive systems become more powerful, they can deliver higher peak outputs when riders call on maximum assistance. This places greater demands on the battery, starting with the individual cell.

That extra power is most useful when the going gets tough – whether that means a steep climb, a heavy load or a muddy stretch of trail. A higher assistance mode can give the rider the extra boost needed to tackle these challenges. For the battery, however, delivering that extra assistance means handling a much higher current load.

More and more e-bike systems are offering higher torque, adding boost modes, and increasing assistance ratios, which require batteries to deliver higher peak power”

Inside the cell

Instead of simply putting more demand on conventional cells, Joycube is using a different internal design: tabless/multi-tab cells. This allows batteries to deliver higher peak power while maintaining the same battery dimensions.

In conventional single-tab cells, one or a small number of tabs provide the connection between the electrode and the outside circuit. Because current has to travel along the electrode sheet to these connection points, the path can be relatively long and concentrated.

In a tabless/multi-tab design, the entire end of the current collector can participate in current transmission. This creates a shorter and more evenly distributed path for current, helping to reduce internal resistance and energy losses.

“The tabless/multi-tab design enables higher current output by improving how current flows and how heat is managed inside the cell,” Huang explains. “The larger conductive area spreads current more evenly through the cell, reducing localised heat and the risk of hotspots. It also helps heat dissipate more effectively, allowing the cell to handle higher currents more efficiently.”

Keeping the battery temperature under control

This becomes particularly important at higher current levels, where managing heat is critical for battery performance, reliability and lifespan. In Joycube’s room-temperature tests at a continuous 40A discharge, a tabless/multi-tab 21700 5Ah cell reached a cutoff temperature of 70°C. A standard single-tab cell under the same conditions reached a 100°C cutoff temperature.

The complete battery pack also needs to be designed to handle higher currents. This can mean higher-current connectors, thicker wiring, double-layer nickel strips or copper-alloy components, and BMS heat sinks to help manage the additional load.

The tabless/multi-tab design enables higher current output by improving how current flows and how heat is managed inside the cell”

In other words, increasing current capability is not simply a matter of choosing a different cell. The entire battery pack needs to handle the additional electrical and thermal load.

To help ensure higher-current operation is safe and reliable, Joycube says it has tested hundreds of battery packs at different discharge currents, monitoring temperature rise and the performance of key components, including cells, nickel strips, connectors, wiring harnesses and the battery management system.

What does it mean for riders?

For riders, what matters is how effectively the battery can deliver its available energy when high power is needed. Higher current capability is also different from simply increasing battery capacity. A larger battery can store more energy, but it does not automatically mean it can deliver that energy quickly enough to meet the demands of a high-power drive system. This makes the battery’s ability to handle current an increasingly important part of the overall power system.

Of course, there are rules to consider too, with European regulations shaping how these systems develop. Joycube notes that these rules set a 250W limit for rated motor power, while peak power and the duration for which it can be delivered are treated differently. The company says it will keep a close watch on any changes to the regulatory landscape.

As e-bike power continues to climb, batteries need to keep up without simply running harder or hotter. Tabless/multi-tab cells can help deliver the higher currents that powerful drive systems demand while keeping heat and electrical losses under control.

This article is sponsored by Joycube.